Send Inquiry Send SMS
Home » Products » Oil » Cutting Oil

Cutting Oil

Cutting Oil
Cutting Oil
Send Inquiry
Product Code : RA 2002
Brand Name : AARYA
Product Description

AARYA COOL-CUT

IS: 1115 – 1986 (RA 2002)

AARYA CUTTING OIL


PRODUCT DESCRIPTION: AARYA COOL-CUT is MULTI-PURPOSE SOLUBLE CUTTING OIL manufactured from carefully selected paraffinic base oils and proprietary emulsifiers which have a bearing on the stability of the emulsion even with water of 400 ppm hardness. A sable milky white emulsion is prepared by adding the oil to water with continuous stirring. AARYA COOL-CUT gives the desired cooling characteristics, provides rust protection, lubricity fire the cutting operation with good finish of work piece and longer life for tools. AARYA COOL-CUT is also fortified with appropriate biocides to keep control of bacterial growth.

APPLICATION: AARYA COOL-CUT is recommended for variety of cutting operations in both ferrous and non-ferrous metals. For general machining operations the emulsion is normally prepared with 5% oil and for grinding operation the emulsion has 2% of oil.

CAUTION: Not recommended for magnesium as fine chips of magnesium is a fire hazard when moistened with water.

PERFORMANCE LEVEL: Meets IS 1115-1986 (RA 2002)

Typical Properties

CHARACTERISTICS

AARYA COOL-CUT

Water, % mass, Max

10.0

Copper strips corrosion at 1000C for 3 Hrs, Max.

1 (a)

Emulsion Stability Test, 5.1 and 20:1 ratio in water of 400 ppm hardness

Passes

Thermal stability Test

Passes

Ash, % by mass, Max.

3.5

Frothing Test, 5.1 and 20.1 ration in water of 200 ppm

Passes

Flash Point, COC, 0C, Min.

150

Cast Iron corrosion test

0/1-1

Available Packing: 26 Ltr & 210 Ltr


These are typical figures and do not constitute specification. In pursuit of continuous improvement, these figures may be changed without notice at sole discretion of Aryan Lubricants Pvt. Ltd.


ARROW FINE CHEMICALS
X


ARROW FINE CHEMICALS All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.